
Technical specifications
- Article Number
- 570000221500796
- Input Voltage
- 220-240 VAC 50/60 Hz
- Max Power
- 0,1 W
- Control / Dimming
- Casambi Ready; 3-in-1 presence/lux/temp; 2.4 GHz radio +20 dBm; ø8 m at 2.4 m; 96 zones; 100°
- Dimensions
- monteringshål 56 mm
- Operating Temperature
- +5…+50°C
- Mounting
- recessed in suspended ceiling
- Additional Spec
- Jumitech SD360-8; lux 0-4000, temp 0-100°C
- IP Class
- IP20
- Brand
- Jumitech
- Wireless Protocol
- Casambi Bluetooth
- Long Range
- No
- NFC Configurable
- No
Documents
Description
The Jumitech SD360-8 Casambi is a 3-in-1 sensor from Jumitech that measures presence, light (lux) and temperature in one unit, Casambi Ready via a 2.4 GHz radio with +20 dBm transmit power for good range. Mains supply 220–240 VAC 50/60 Hz, very low consumption 0.1 W. Detection area roughly ø8 m at 2.4 m mounting height, 100° lobe, supports up to 96 zones for fine-grained zoning of large areas. Lux measurement 0–4000 lux and temperature measurement 0–100°C give data for both daylight regulation and basic environmental monitoring from a single mounting point. Recessed mounting in a suspended ceiling, Ø56 mm cut-out. IP20 – dry indoor use only. Operating range +5…+50°C. Note: the product requires a Salvador licence per unit (7 units) for Casambi integration – check licensing needs before specifying a job. Suited to offices and commercial spaces where a single sensor needs to cover presence, light and temperature data for both lighting and energy control on the same Casambi network.
Need help with the installation?
Our technicians help you get going with commissioning, configuration and troubleshooting. Get in touch and we will guide you all the way.
Get installation help










